Shopping for the best R290 heat pumps usually leads to one fork in the road: whole-home packaged units that sit outside on a slab, or high-efficiency split systems and mini splits that use next-generation refrigerants like R-32. My top overall pick is the Goodman 3-Ton 15.2 SEER2 Multi-Position R-32 Heat Pump System with Air Handler, because it pairs the highest efficiency rating in this lineup with flexible installation and a trusted air handler match. If budget matters most, the Ace Air 3.5 Ton 13.4 SEER2 Packaged Unit with 10kW Heat Kit delivers the most heating and cooling capacity per dollar, while the Daikin Entra 24,000 BTU mini split is the standout for single-room efficiency and quiet operation. The main tradeoff you will face is efficiency versus simplicity: packaged units install faster and cost less up front, but split systems and mini splits run cheaper over time. Read on for the full breakdown.
Get backup power and energy gear delivered free with Prime
- Fast, free delivery on millions of items
- Prime Video, Amazon Music and more included
- Member-only deals all year
Key Takeaways
- SEER2 spread is wide in this lineup — from 13.4 on the packaged Ace Air and Goodman units to 18 on the Daikin Entra mini splits — so the biggest efficiency gains come from choosing a split or ductless design over a packaged box, not from comparing packaged models to each other.
- Packaged units (Ace Air and Goodman GPHH models) consistently include or bundle a 10kW electric heat kit, which matters in colder climates where heat pump output alone drops off; most split systems here require buying backup heat separately.
- Ton-for-ton, Goodman‘s 15.2 SEER2 R-32 split systems outperform their 14.3 SEER2 counterparts for a modest step up, making the 14.3 tier the weakest value position in this comparison unless heavily discounted.
- The Daikin Entra mini splits serve a different buyer entirely — room-level zoning, no ductwork, and the highest efficiency here — but they cannot replace a whole-home packaged or split system without multiple units.
- Watch the air handler pairing on Goodman systems: two entries share the same GLZS4BA2410 condenser but differ in handler and heat kit, and a mismatched handler can erase the rated efficiency you paid for.
| R290 heat pump | Refrigerant | Warranty | Capacity | Efficiency |
|---|---|---|---|---|
| Ace Air 3.5 Ton 13.4 SEER2 Hor | R32 | 10-year parts limited | 3.5 Ton / 42,000 BTU | 13.4 SEER2 |
| Goodman 3-Ton 14.3 SEER2 R-32 | R-32 | — | 3 Tons | 14.3 SEER2 |
| Goodman 3-Ton 15.2 SEER2 Multi | R-32, pre-charged for 15 ft lineset | — | — | — |
| ACE AIR GPHH3 Series 3 Ton Hor | R32 | 10-year parts (with qualified install and registration) | 3 Ton (36,000 BTU) | 13.4 SEER2 |
| Goodman 2.5 Ton 13.4 SEER2 Pac | R-32 | — | 2.5 Tons | 13.4 SEER2 |
| Goodman 2.5 Ton 14.3 SEER2 R-3 | R-32 | 10-year parts with qualified install and 60-day registration | — | — |
| Goodman 3 Ton Heat Pump Packag | R-32 | 10-year parts limited | 3 tons / 36,000 BTU | — |
| Ace Air 13.4 SEER2 Horizontal | R-32 | 10-year parts limited | 2.5 tons / 30,000 BTU | — |
| Daikin Entra R32 Series 18,000 | R-32 (pre-charged) | — | — | — |
| Goodman 2-Ton Multi-Position R | R-32 | 10-year parts with qualified install and 60-day registration | — | — |
| Goodman 2-Ton 15.2 SEER2 R-32 | R-32 | 10-year parts limited | 2 tons | 15.2 SEER2 |
| Goodman 2.5 Ton 15.2 SEER2 Mul | R-32 | 10-year parts limited (with registration) | — | 15.2 SEER2 |
| Daikin 24,000 BTU 18 SEER2 Ent | R-32 | — | — | 18 SEER2, 9 HSPF2 |
More Details on Our Top Picks
Ace Air 3.5 Ton 13.4 SEER2 Horizontal Heat Pump Package Unit with 10kW Electric Heat Kit
This is the largest-capacity option in this lineup, and that alone defines who it’s for. With 42,000 BTU of output, it outguns the 3-ton Ace Air GPHH3 by half a ton, which matters if a smaller unit would run constantly on the hottest or coldest days. The included 10kW electric heat strip gives it real cold-weather backup, something split systems like the Goodman GLZS4BA3610 condenser don’t bundle in. Compared with the Goodman 3-ton packaged unit, the all-aluminum coil and louvered protection here are geared toward long-term durability in exposed installations. The tradeoff is placement: this is a horizontal-only cabinet, so buyers without a rooftop slab or ground pad that fits a 66-inch-deep footprint will need to look elsewhere. At 390 pounds, plan on a crane or a two-person crew at minimum.
Pros:- Highest capacity in the lineup at 3.5 tons / 42,000 BTU
- 10kW electric heat strip included for cold-snap backup heating
- All-aluminum coil resists corrosion better than standard copper-tube designs
- Quiet multi-speed ECM blower adapts airflow to demand
Cons:- 13.4 SEER2 is the lowest efficiency tier here, so operating costs run higher than the Goodman 15.2 SEER2 split system
- 390-pound horizontal cabinet severely limits where it can be installed
Best for: Owners of larger homes or light commercial spaces (roughly 1,800–2,200 sq ft) who need maximum capacity in one all-in-one cabinet with integrated auxiliary heat
Not ideal for: Buyers with tight side yards or vertical-only installation spots — the horizontal-only design and 66-inch depth rule out many residential placements
- Capacity:3.5 Ton / 42,000 BTU
- Efficiency:13.4 SEER2
- Refrigerant:R32
- Heat Kit:10kW electric heat strip included
- Voltage:208/230V, 1-phase, 60Hz
- Dimensions:66″ D x 35″ W x 34″ H
- Weight:390 lbs
- Warranty:10-year parts limited
Our verdict“This pick makes the most sense for buyers who need serious capacity and built-in backup heat in a single packaged unit, and who have the space to install it.”
Goodman 3-Ton 14.3 SEER2 R-32 Heat Pump Condenser (GLZS4BA3610)
Most entries in this roundup are complete systems, but this one serves a different job: it’s a condenser-only replacement for anyone whose outdoor unit died while their indoor air handler still works. It directly replaces older Goodman GSZB403610 and GSZ140361 models, which means existing linesets and pads often carry over. The CoreSense diagnostics and SmartShift short-cycle protection are genuine differentiators versus the Ace Air packaged units — they protect the compressor from restart abuse that kills cheaper units early. Efficiency sits at 14.3 SEER2, a step above the 13.4 SEER2 packaged options but below the 15.2 SEER2 Goodman split system, because that bundle pairs this same condenser with a matched air handler. One caution: listings for this model have shown refrigerant and voltage inconsistencies, so verify R-32 compatibility with your contractor before ordering.
Pros:- Direct drop-in replacement for GSZB403610 and GSZ140361 models
- CoreSense diagnostics and SmartShift protection extend compressor life
- Factory sound blanket keeps compressor noise down
- 14.3 SEER2 beats the 13.4 SEER2 packaged Ace Air units on efficiency
Cons:- Condenser only — no air handler, thermostat, or lineset included
- Refrigerant and voltage details have been listed inconsistently, requiring verification before purchase
Best for: Homeowners replacing a failed Goodman 3-ton outdoor unit who want to keep their existing indoor air handler and avoid a full system swap
Not ideal for: Anyone building a complete new system — buying the matched Goodman GLZS4BA3610 + AMST42CU1300 bundle costs less hassle and delivers higher system efficiency
- Model:GLZS4BA3610
- Replaces:GSZB403610, GSZ140361
- Capacity:3 Tons
- Efficiency:14.3 SEER2
- Refrigerant:R-32
- Dimensions:30″ x 31″ x 41″
- Weight:200 lbs
Our verdict“Buy this if your existing 3-ton Goodman outdoor unit failed and your indoor equipment is still healthy; skip it if you need a whole system.”
Goodman 3-Ton 15.2 SEER2 Multi-Position R-32 Heat Pump System with Air Handler (GLZS4BA3610 + AMST42CU1300)
This bundle is where efficiency peaks in this batch. Pairing the GLZS4BA3610 condenser with the matched AMST42CU1300 air handler lifts system performance to 15.2 SEER2 — roughly a 13 percent gain over the same condenser bought alone and well ahead of the 13.4 SEER2 Ace Air packaged units. The 9-speed ECM blower is the quiet star here: instead of blasting at one speed like the single-speed condenser fan it’s paired with, it trims airflow to match demand, which translates to fewer temperature swings and lower fan noise. Coming pre-charged for 15 feet of lineset and AHRI-certified as a matched pair removes the guesswork that plagues pieced-together systems. The compromises are real though: downflow installs need a separately sold kit, and there’s no auxiliary heat strip in the box, unlike both Ace Air units.
Pros:- Highest system efficiency in this batch at 15.2 SEER2
- Matched, AHRI-certified condenser and air handler avoid compatibility problems
- 9-speed ECM blower delivers consistent, quiet airflow across the house
- Pre-charged for 15 ft of lineset speeds up installation
Cons:- Downflow configuration requires an optional kit sold separately
- No auxiliary heat strip included, unlike the Ace Air packaged units
Best for: Homeowners replacing a full split system who want the lowest long-term operating costs and a certified matched pair out of the box
Not ideal for: Cold-climate buyers who rely on backup heat — no electric heat strip is included, and the single-speed condenser fan limits cold-weather modulation
- Cooling Capacity:36,000 BTU (3 tons)
- System Efficiency:15.2 SEER2
- Refrigerant:R-32, pre-charged for 15 ft lineset
- Blower Motor:9-speed ECM, direct-drive
- Installation:Upflow, horizontal left/right (downflow kit sold separately)
- Certifications:AHRI Certified, ETL Listed
- Noise Level:75 dB
Our verdict“This option stands out for buyers prioritizing efficiency and a guaranteed-matched system over all-in-one convenience.”
ACE AIR GPHH3 Series 3 Ton Horizontal Heat Pump Package Unit, 13.4 SEER2, 36K BTU, with 10kW Heat Kit
Where the Goodman 15.2 SEER2 split system wins on efficiency, this Ace Air packaged unit wins on completeness. Everything lives in one cabinet — heat pump, blower, and a 10kW auxiliary heat strip already installed — so there’s no separate air handler to buy, no refrigerant lines to run, and no downflow kit to track down. Compared with its bigger sibling, the 3.5-ton Ace Air, this 3-ton version is 20 pounds lighter and better sized for average homes around 1,500–1,800 square feet. The 10-year parts warranty is competitive, but read the fine print: it only activates with a qualified installer and online registration, so a DIY-adjacent install voids it. Efficiency is the weak point — 13.4 SEER2 will cost noticeably more to run each month than the Goodman split bundle in moderate climates.
Pros:- Truly complete system: heat pump, blower, and 10kW heat strip in one cabinet
- No refrigerant lineset work needed, unlike split systems
- Multi-speed ECM blower keeps airflow noise low
- 10-year parts warranty with qualified installation and registration
Cons:- Lowest-tier 13.4 SEER2 efficiency means higher monthly operating costs
- Warranty requires professional installation plus online registration to be valid
Best for: Homeowners in cooler regions who want single-cabinet simplicity with genuine electric backup heat already installed, at mid-range capacity
Not ideal for: Warm-climate buyers focused on summer cooling bills — the 13.4 SEER2 rating will cost more to operate than the 15.2 SEER2 Goodman split system
- Capacity:3 Ton (36,000 BTU)
- Efficiency:13.4 SEER2
- Refrigerant:R32
- Heat Kit:10kW auxiliary heat strip included
- Voltage:208/230V, 1-phase, 60Hz
- Dimensions:66″ D x 35″ W x 34″ H
- Weight:370 lbs
- Warranty:10-year parts (with qualified install and registration)
Our verdict“This model is better suited to cold-climate buyers who value one-box convenience and built-in backup heat over maximum efficiency.”
Goodman 2.5 Ton 13.4 SEER2 Packaged Heat Pump (GPHH33031)
This is the lightest-duty packaged option in the roundup, sized at 2.5 tons for smaller homes, additions, or light commercial spaces where a 3-ton unit would short-cycle. Its main advantage over the 2.5-ton Ace Air equivalent is the Goodman brand’s nationwide installer network — finding a contractor willing to service it, and parts for it, tends to be easier in most markets. Using R-32 refrigerant keeps it aligned with current standards. The honest drawback is transparency: this listing offers far less documentation than the Ace Air units, which spell out heat kit inclusion, blower type, and warranty terms. If you need a bundled electric heat strip or confirmed cabinet dimensions before ordering, you’ll have to confirm those directly with Goodman or your installer. Think of it as the right-size choice for a modest space, provided you do the spec homework first.
Pros:- 2.5-ton sizing fits smaller homes without short-cycling
- Goodman’s broad installer and parts network makes service easier to find
- R-32 refrigerant meets current environmental standards
- Works for both residential and light commercial applications
Cons:- Sparse published specs make pre-purchase planning difficult
- No heat strip, blower, or warranty details confirmed in the listing
Best for: Owners of smaller homes or light commercial spaces (roughly 1,200–1,500 sq ft) who want a recognized-brand packaged unit that’s easy to get serviced locally
Not ideal for: Detail-driven buyers who need confirmed specs up front — this listing lacks heat kit, blower, and dimension details that the Ace Air packaged units publish
- Model:GPHH33031
- Capacity:2.5 Tons
- Efficiency:13.4 SEER2
- Refrigerant:R-32
- Type:Packaged Heat Pump
- Application:Residential and light commercial
Our verdict“A sensible right-sized packaged unit for modest spaces, provided you verify the missing specs with your installer before buying.”
Goodman 2.5 Ton 14.3 SEER2 R-32 Heat Pump Split System (GLZS4BA3010 & AMST30BU1300) with Non-Programmable Thermostat
This Goodman split system stands out for buyers who need true whole-home heating and cooling rather than the single-room coverage a mini split like the Daikin Entra provides. The 2.5-ton capacity sits in the sweet spot for medium-sized homes, and the 9-speed ECM blower in the air handler does more than move air — it lets the system fine-tune airflow to reduce hot and cold spots that single-stage packaged units often struggle with. Compared with the Goodman 3 Ton Package Unit, this split configuration offers quieter indoor operation since the compressor lives outside. The tradeoff is real, though: it’s single-stage rather than inverter-driven, so expect more temperature swings than the Daikin, and the heat kit for cold climates costs extra.
Pros:- 2.5-ton capacity well matched to medium-sized homes with existing ductwork
- 9-speed ECM blower enables precise airflow and quieter indoor operation than packaged units
- Bundled digital thermostat saves an extra purchase at install time
- 10-year parts warranty with qualified installation and registration
Cons:- Single-stage operation means more temperature swings than inverter systems
- Heat kit required for cold climates and sold separately
- Downflow installation requires an additional kit purchase
Best for: Homeowners replacing an existing 2.5-ton split system who want ducted whole-home comfort with a bundled thermostat
Not ideal for: Buyers in cold climates who need cold-weather heating out of the box — the heat kit is sold separately
- Cooling Capacity:2.5 tons
- Refrigerant:R-32
- SEER2:14.3
- Blower Motor:9-speed ECM, direct-drive
- Configuration:Upflow, horizontal left, horizontal right
- Installation Type:Split system
- Warranty:10-year parts with qualified install and 60-day registration
Our verdict“A solid pick for a medium home with ducts, provided you budget for the separately sold heat kit if winters get cold.”
Goodman 3 Ton Heat Pump Package Unit, 36,000 BTU, 13.4 SEER2, R-32
For larger homes or light commercial spaces, this 3-ton packaged unit makes the most sense because it consolidates everything into one outdoor cabinet — no air handler, no attic space, no refrigerant lines to run. That’s the key difference from the Goodman 2.5 Ton Split System: simpler installation, at the cost of indoor noise since everything lives in one box. The two-stage scroll compressor is a genuine step up from the single-stage Goodman splits in this lineup, allowing gentler transitions and steadier temperatures. Efficiency at 13.4 SEER2 trails the split systems’ 14.3-15.2 ratings, which is the standard tradeoff for packaged convenience. The 78 dB noise rating also means placement matters — this belongs away from bedrooms and patios.
Pros:- 36,000 BTU capacity handles larger homes and light commercial loads
- Two-stage scroll compressor delivers steadier temperatures than single-stage Goodman splits
- All-in-one cabinet simplifies installation versus split systems
- All-aluminum coils and galvanized steel cabinet resist corrosion
Cons:- 13.4 SEER2 trails the split systems in this roundup
- No inverter technology, limiting efficiency at partial loads
- Requires professional 208/230V electrical setup
Best for: Owners of larger homes or small commercial buildings who want a single-cabinet replacement on an existing packaged-unit pad
Not ideal for: Homes with tight lot lines or bedrooms near the unit placement — 78 dB is louder than split systems
- Capacity:3 tons / 36,000 BTU
- SEER2:13.4
- HSPF2:6.7
- Refrigerant:R-32
- Compressor:Scroll, two-stage
- Voltage:208/230V, 1-phase, 60Hz
- Noise Level:78 dB
- Warranty:10-year parts limited
Our verdict“The right call when capacity and one-cabinet simplicity matter more than peak efficiency.”
Ace Air 13.4 SEER2 Horizontal Heat Pump Package Unit, 2.5 Ton / 30,000 BTU with 10kW Electric Heat Kit
This Ace Air package unit solves the biggest frustration I see with the Goodman packaged and split systems in this roundup: the 10kW electric heat strip is included, not a separate purchase. That matters if you live somewhere with real winters, because auxiliary heat is what keeps a heat pump delivering when outdoor temperatures drop below the point where refrigerant heating alone struggles. Compared with the Goodman 3 Ton Package Unit, you trade a ton of capacity for cold-weather readiness and a lighter electrical demand (3.4 kW vs. the strip’s dedicated circuit). The 13.4 SEER2 rating matches other packaged units here — respectable, but well behind the Daikin Entra’s 18 SEER2. At 330 pounds, plan for a two-person crew and proper rigging during installation.
Pros:- 10kW electric heat kit included for genuine cold-weather performance
- Multi-speed ECM blower keeps operation quiet for a packaged unit
- R32 refrigerant aligns with current environmental standards
- 10-year parts limited warranty
Cons:- 330-pound weight complicates handling and installation
- Professional installation required to keep the warranty valid
- Lower capacity than competing 3-ton packaged units
Best for: Homeowners in colder regions who want auxiliary heat included in one purchase instead of buying strips separately
Not ideal for: Mild-climate buyers who would pay for a 10kW heat strip they’ll rarely use
- Capacity:2.5 tons / 30,000 BTU
- SEER2:13.4
- Refrigerant:R-32
- Heat Strip:10 kW included
- Voltage:208/230V, 1-phase, 60Hz
- Dimensions:66″ D x 30″ W x 34″ H
- Weight:330 lbs
- Warranty:10-year parts limited
Our verdict“The packaged-unit pick for cold climates, since the auxiliary heat you’d otherwise buy separately is already in the box.”
Daikin Entra R32 Series 18,000 BTU 18 SEER2 Heat Pump Mini Split Air Conditioner
Efficiency is where the Daikin Entra simply outclasses everything else here — its 18 SEER2 and 9 HSPF2 ratings dwarf the 13.4-15.2 numbers posted by the Goodman and Ace Air systems, and the reason is DC inverter technology. Instead of the full-on/full-off cycling of the single-stage Goodman splits, the Entra modulates its output between roughly 6,900 and 20,000 BTU, which translates to lower bills and steadier room temperatures. It also heats down to 5°F outdoors, reducing reliance on backup heat. The tradeoff is scope: this is a single-zone unit for up to 1,000 sq. ft., not a whole-home solution like the Goodman 2.5 Ton Split System. The included line set, bracket, and interconnecting cables soften the installation cost, but professional setup is still a meaningful add-on.
Pros:- 18 SEER2 / 9 HSPF2 efficiency leads this roundup by a wide margin
- DC inverter compressor modulates output for steady comfort and lower bills
- Heating operates down to 5°F outdoors
- Line set, mounting bracket, and cables included
Cons:- Single-zone design covers only one space up to 1,000 sq. ft.
- Professional mini-split installation adds meaningful cost
- Cooling shuts off above/below narrower operating windows than some competitors
Best for: Owners of additions, garages, or single large rooms who want the lowest operating costs in this lineup
Not ideal for: Whole-home buyers — a single zone can’t replace a ducted system like the Goodman splits
- Cooling Capacity:18,100 BTU (6,900-20,000 range)
- Heating Capacity:18,000 BTU (5,800-22,500 range)
- SEER2:18
- HSPF2:9
- Coverage Area:Up to 1,000 sq. ft.
- Heating Range:5°F to 65°F
- Refrigerant:R-32 (pre-charged)
- Type:Wall-mounted single-zone mini split
Our verdict“If your need is one room and your priority is efficiency, nothing else in this lineup comes close.”
Goodman 2-Ton Multi-Position R-32 Heat Pump System with Air Handler (GLZS4BA2410 Condenser + AMST24BU1300 Air Handler)
This 2-ton Goodman system is the value play among the splits because it keeps the platform’s core strengths — 15.2 SEER2 efficiency, R-32 refrigerant, corrosion-resistant aluminum coils, and the 10-year parts warranty — while scaling capacity down to what smaller homes actually need. Notably, its efficiency rating actually beats the larger Goodman 2.5 Ton 14.3 SEER2 system, so smaller-space buyers aren’t settling for second-best. Compared with the Ace Air 2.5 Ton Package Unit, you get higher efficiency and quieter indoor operation, but you give up the included 10kW heat strip — cold-climate buyers will need to buy one separately. The grooved-tubing heat transfer design in the air handler is a nice touch at this capacity, and the pre-charged condenser with service valves trims install labor time.
Pros:- 15.2 SEER2 rating beats the larger 2.5-ton Goodman split system
- Grooved aluminum tubing improves heat transfer in the air handler
- Pre-charged condenser with service valves reduces installation labor
- 10-year parts warranty with qualified installation
Cons:- Heat kit required for cold climates and sold separately
- Single-stage operation lacks the modulation of inverter systems like the Daikin Entra
- Warranty requires online registration within 60 days
Best for: Owners of smaller homes or condos with existing ducts who want split-system efficiency without paying for unused capacity
Not ideal for: Cold-climate buyers wanting an all-inclusive package — heat kit and thermostat are separate purchases
- Cooling Capacity:24,000 BTU (2 tons)
- SEER2:15.2
- Refrigerant:R-32
- Noise Level:74 dB
- Installation Type:Split system
- Application:Residential
- Warranty:10-year parts with qualified install and 60-day registration
Our verdict“The smart buy for a smaller ducted home — you get the lineup’s better efficiency rating at a lower capacity that matches the space.”
Goodman 2-Ton 15.2 SEER2 R-32 Heat Pump System with Front Return Air Handler and 10kW Heat Kit (GLZS4BA2410 + AWST30LU1310)
This Goodman package stands out for arriving as a genuinely complete system — condenser, front-return air handler, and a factory-installed 10kW heat kit all in one order. Compared with the 2.5-ton GLZS4BA3010 system, which leaves you buying the heat strip separately, this pick removes a parts-list headache and covers auxiliary heating for freezing nights out of the box. The 15.2 SEER2 rating puts it ahead of the 13.4 SEER2 packaged units elsewhere in this roundup, meaning lower running costs over a typical decade of ownership. The tradeoff is single-stage operation: without inverter technology like the Daikin Entra mini split, temperature swings will be more noticeable and efficiency at partial load weaker. Warranty activation also demands professional installation and online registration within 60 days.
Pros:- Condenser, air handler, and 10kW heat kit bundled in one purchase
- 15.2 SEER2 efficiency beats the 13.4 SEER2 packaged alternatives
- AHRI-certified matched system (certificate 215218025)
- 10-year parts limited warranty with qualified installation
Cons:- Single-stage compressor offers coarser temperature control than inverter models
- Warranty void without professional install and 60-day registration
- No inverter technology, so standby efficiency lags mini splits
Best for: Homeowners in frost-prone regions replacing a full 2-ton split system who want electric backup heat included rather than ordered separately
Not ideal for: Buyers chasing tight temperature control and quiet low-speed operation — the single-stage compressor can’t match inverter-driven comfort
- Brand:Goodman
- Capacity:2 tons
- Refrigerant:R-32
- Efficiency:15.2 SEER2
- Air Handler:AWST30LU1310 wall-mounted, front return
- Heat Kit:10kW, factory installed
- Installation Type:Split System
- Warranty:10-year parts limited
Our verdict“This pick makes the most sense for cold-climate buyers who want a matched, heat-strip-equipped 2-ton system delivered as one package.”
Goodman 2.5 Ton 15.2 SEER2 Multi-Position R-32 Heat Pump System with Air Handler (GLZS4BA3010 Condenser + AMST42CU1300 Air Handler)
Sitting between the 2-ton and 3-ton Goodman systems in this lineup, this 2.5-ton configuration hits a sizing sweet spot for homes around 1,200–1,500 sq. ft. that the smaller GLZS4BA2410 package would undershoot. Its differentiator is the AMST42CU1300 multi-position air handler, which can be mounted in several orientations — a flexibility the front-return-only AWST30LU1310 unit doesn’t offer, and one that matters when closet or attic geometry is awkward. Corrosion-resistant aluminum with grooved tubing improves heat transfer, and the multi-speed blower moderates airflow noise compared with fixed-speed handlers. The honest drawbacks: unlike its 2-ton sibling, the heat kit is sold separately, the compressor is single-stage, and the listed 77 dB outdoor noise level is louder than the inverter-driven Daikin Entra mini split.
Pros:- Multi-position air handler fits varied installation geometries
- Multi-speed blower motor for quieter, more even airflow
- Corrosion-resistant aluminum coil with grooved tubing for better heat transfer
- 15.2 SEER2 with eco-friendlier R-32 refrigerant
Cons:- Heat kit sold separately and needed below freezing
- Single-stage compressor gives less precise temperature control
- 77 dB outdoor noise level is high for compact lots
Best for: Owners of mid-size homes with tricky mechanical spaces who need flexible air-handler mounting and 30,000 BTU of capacity
Not ideal for: Cold-climate buyers on a firm budget — the required HKTS heat kit is an extra purchase the 2-ton Goodman bundle already includes
- Cooling Capacity:2.5 Ton (30,000 BTU)
- Refrigerant:R-32
- Condenser Model:GLZS4BA3010
- Air Handler Model:AMST42CU1300, multi-position
- Efficiency:15.2 SEER2
- Compressor:Rotary/Scroll, single-stage
- Blower Motor:Multi-speed
- Noise Level:77 dB
- Warranty:10-year parts limited (with registration)
Our verdict“A strong middle-weight choice when capacity and mounting flexibility matter more than inverter refinement.”
Daikin 24,000 BTU 18 SEER2 Entra R32 Series Heat Pump Mini Split A/C
For spaces without ductwork, this Daikin Entra is the refinement play of the roundup. Its DC Inverter compressor ramps capacity between 6,900 and 24,200 BTU instead of cycling on and off, which translates into steadier temperatures, quieter operation, and an 18 SEER2 / 9 HSPF2 rating that clearly outclasses the 15.2 SEER2 Goodman splits on efficiency. Unlike both Goodman systems — where heat strips are either bolted on or bought separately — the Entra heats natively down to 5°F, though deep-freeze output will drop. The bundle is unusually complete: 25 ft line set, wall bracket, and remote arrive together, saving the piecemeal ordering the Goodman packages demand. The premiums are real too — higher upfront cost and mandatory professional refrigerant handling mean this is not a DIY or budget path.
Pros:- DC Inverter technology for precise capacity modulation and quiet operation
- 18 SEER2 and 9 HSPF2 lead this lineup on efficiency
- Heats effectively down to 5°F without auxiliary strips
- Includes 25 ft line set kit, wall bracket, and photocatalytic air purification filter
Cons:- Higher upfront cost than split systems and basic mini splits
- Requires professional installation for refrigerant handling
- Single-zone design limits whole-home coverage versus ducted systems
Best for: Renovators, additions, or ductless homes up to 1,500 sq. ft. who prioritize efficiency and consistent comfort over lowest install cost
Not ideal for: Budget-focused buyers or anyone with existing ducts — a Goodman split system delivers similar capacity for less without the inverter premium
- Cooling Capacity:24,000 BTU (6,900–24,200)
- Heating Capacity:23,000 BTU (5,800–27,300)
- Efficiency:18 SEER2, 9 HSPF2
- COP:3.30
- Refrigerant:R-32
- Coverage Area:Up to 1,500 sq. ft.
- Heating Range:5°F to 65°F
- Included Items:Fan coil, condenser, remote, 25 ft line set, wall bracket
Our verdict“If ductwork isn’t in the picture and long-term efficiency matters, this inverter-driven system justifies its premium over every Goodman option here.”

How We Picked
I evaluated each model on four buyer-relevant criteria: efficiency rating (SEER2, which directly drives monthly operating cost), capacity fit (whether the tonnage and BTU output match common home sizes), installation format (packaged versus split versus ductless, since this determines labor cost and ductwork requirements), and included components — a bundled heat kit, air handler, or thermostat changes the true cost of ownership considerably. I also weighed refrigerant type, since next-gen refrigerants like R-32 and R290 carry lower global warming potential and better future-proofing than legacy R-410A systems.
The ranking logic favors total cost over the system’s life, not just the spec sheet. High-SEER2 split systems rank above comparable packaged units because the efficiency gap compounds every month, while packaged units rank highly on value and simplicity for buyers replacing an existing rooftop or slab unit. Mini splits are ranked within their own lane — judged against each other for zoning and efficiency — because comparing a single-room ductless unit head-to-head with a 3-ton whole-home system would mislead rather than help.
| R290 heat pump | Refrigerant |
|---|---|
| Ace Air 3.5 Ton 13.4 SEER2 Hor | R32 |
| Goodman 3-Ton 14.3 SEER2 R-32 | R-32 |
| Goodman 3-Ton 15.2 SEER2 Multi | R-32, pre-charged for 15 ft lineset |
| ACE AIR GPHH3 Series 3 Ton Hor | R32 |
| Goodman 2.5 Ton 13.4 SEER2 Pac | R-32 |
| Goodman 2.5 Ton 14.3 SEER2 R-3 | R-32 |
| Goodman 3 Ton Heat Pump Packag | R-32 |
| Ace Air 13.4 SEER2 Horizontal | R-32 |
| Daikin Entra R32 Series 18,000 | R-32 (pre-charged) |
| Goodman 2-Ton Multi-Position R | R-32 |
| Goodman 2-Ton 15.2 SEER2 R-32 | R-32 |
| Goodman 2.5 Ton 15.2 SEER2 Mul | R-32 |
| Daikin 24,000 BTU 18 SEER2 Ent | R-32 |
Factors to Consider When Choosing Best R290 Heat Pumps
Before settling on a specific model, it helps to understand the structural choices that shape every R290-class heat pump purchase. These are the decisions that cost — or save — the most money, and they matter more than small spec differences between similar units.Packaged, Split, or Ductless: The Format Decision Comes First
Everything else in your decision flows from this choice. Packaged units put the compressor, coil, and air handling in one outdoor cabinet, which makes them the natural replacement for an existing rooftop or slab unit and keeps installation labor low — but their efficiency ceiling is lower. Split systems separate the condenser and air handler, gaining efficiency and quieter indoor operation at the cost of refrigerant line work and a matched indoor unit. Ductless mini splits skip ductwork entirely, making them the only realistic option for additions, garages, and homes without ducts. A common mistake is buying a packaged unit for a home with an existing split configuration (or vice versa) because the sticker price looked better — the conversion labor erases any savings. Match the format to what your home already has unless you have a specific reason to change.
Sizing Correctly: Why Bigger Is Not Better
An oversized heat pump short-cycles: it satisfies the thermostat too quickly, dehumidifies poorly, and wears out compressors prematurely. An undersized unit runs constantly and struggles on the coldest days. The right approach is a Manual J load calculation based on your home’s square footage, insulation, window area, and climate — not a rule of thumb. As a rough frame, 2-ton systems suit small homes and tight spaces around 800–1,100 sq ft, 2.5-ton covers mid-size homes, and 3-ton-plus handles larger or leakier houses. If you are between sizes, climate should break the tie: hotter climates favor rounding up for cooling, colder climates favor matching heating load precisely so backup electric heat does not carry the load. Also note that in this category, a 3.5-ton packaged unit like the Ace Air is a niche choice — many homes that think they need it actually need better insulation and a 3-ton system.
SEER2 and Real-World Operating Cost
The SEER2 gap between a 13.4 packaged unit and an 18 SEER2 mini split looks small on paper but compounds over a 15-year lifespan, especially in cooling-heavy climates where the unit runs eight months a year. However, efficiency only pays if the system runs as rated: undersized ducts, poor refrigerant charge, and mismatched air handlers routinely knock 20–30% off real-world performance. That is why matched systems from a single manufacturer, where the condenser and air handler are designed and certified together, tend to deliver their rated numbers more reliably than pieced-together combinations. Buyers in mild climates should weigh efficiency less and upfront cost more; buyers in hot, humid climates should treat every SEER2 point as money in the bank. Finally, remember that the heat kit matters in cold climates — a 10kW electric backup changes winter economics more than a point or two of SEER2.
Refrigerant Type and Future-Proofing
Buyers searching for R290 (propane) heat pumps are usually after one thing: low environmental impact and compliance with the refrigerant transition now phasing out high-GWP refrigerants like R-410A. In the North American residential market, most units in this class currently ship with R-32, a lower-GWP refrigerant that offers similar environmental benefits, slightly better efficiency, and an established service network. True R290 units are more common in European water-heating and monobloc designs. What matters practically is this: buying an R-410A system today means owning equipment on a phase-out timeline, with shrinking service support and refrigerant prices that only go up. Any of the R-32 systems in this roundup sidestep that problem. When comparing, confirm refrigerant type in the spec sheet rather than the marketing copy, and check that local technicians are certified to service it.
Installation Cost and What Comes in the Box
The listed hardware price is rarely the final number. Packaged units look more expensive until you realize they need no indoor equipment and minimal line-set work; split systems look cheaper until you add the air handler, pad, lines, and the labor to tie them together. In this roundup, the entries differ sharply on what is included: some Goodman packages come as complete condenser-plus-handler systems, one even bundles a thermostat, while others ship condenser-only and assume you already have a compatible handler. Heat kits are another hidden line item — a 10kW kit bundled with a packaged unit saves a separate purchase and a second electrical circuit planning session. Always price the delivered, installed system, not the box, and verify your electrical panel can support electric backup heat before the truck arrives.
Warranty, Registration, and Installer Quality
Goodman and Daikin (which owns Goodman) back their equipment with strong parts warranties, but those warranties almost always require online registration within 60 days of installation and, for the best terms, installation by a licensed contractor — skip registration and you may drop to a shorter default coverage period. Ace Air packaged units typically carry shorter standard coverage, which is part of why they price lower; factor a possible compressor replacement into the value math. Beyond the paperwork, the installer matters as much as the hardware: an excellent unit installed with a sloppy refrigerant charge will underperform a mediocre unit installed correctly. Get line-item quotes from two or three contractors, ask whether the quote includes load calculation, and confirm who handles warranty claims. A contractor who resists sizing calculations is a contractor who will size by habit.
Frequently Asked Questions
Are these R-32 heat pumps the same as true R290 (propane) heat pumps?
Not exactly, and the distinction matters depending on where you live and why you are searching. R290 is propane, a very low-GWP refrigerant used mostly in European monobloc heat pumps and hot water heaters; R-32 is a low-GWP refrigerant that has become the dominant replacement for R-410A in North American residential equipment. Both represent the same industry shift away from high-GWP refrigerants, and both will remain serviceable for the foreseeable future, unlike R-410A systems now on a phase-out timeline. If your priority is specifically owning propane-refrigerant equipment, you will likely need to look at imported monobloc units, though installer support for them is thinner. For most buyers in North America, an R-32 system delivers the environmental and future-proofing benefits they were searching for, with a far stronger service network behind it.
Should I choose a packaged unit or a split system if my home could support either?
If your home already has a packaged unit on a slab or rooftop, replace like with like — the conversion to a split system adds labor and cost that will not pay back quickly. If you have existing ductwork with a separate indoor air handler, a split system is the better path: it offers higher efficiency ceilings, quieter indoor operation, and easier servicing of individual components. Packaged units win on simplicity, faster installation, and the fact that many ship with the electric heat kit already integrated. Split systems win on long-term operating cost, and the 15.2 SEER2 Goodman systems in this lineup illustrate that advantage clearly. The tiebreaker is usually your climate: in hot regions, the split system’s efficiency advantage compounds enough to justify the extra installation complexity.
What size heat pump do I need for my home?
Start with square footage as a rough guide — roughly 2 tons for 800–1,100 sq ft, 2.5 tons for 1,200–1,500 sq ft, and 3 tons for 1,500–1,900 sq ft — but treat those numbers as a starting point, not an answer. Insulation quality, ceiling height, window area, sun exposure, and climate zone can shift the correct size by a half-ton or more, which is why a proper Manual J calculation beats any sizing chart. Oversizing is the more common and more damaging mistake: the system short-cycles, leaves the house clammy in summer, and stresses the compressor. Undersizing shows up mainly on the coldest nights, when the 10kW backup heat kit picks up the slack at higher electricity cost. If you are between two sizes in a hot climate, go up; if you are between sizes in a mild or cold climate, go down and lean on backup heat.
Is it worth paying more for 15.2 SEER2 instead of 14.3 SEER2 on a Goodman system?
In most cases, yes, provided the price gap is modest. The efficiency difference between the two tiers shows up every cooling season, and in a hot climate with heavy summer use, the 15.2 SEER2 system can offset its premium within a few years and then keep saving for the rest of a 15-year lifespan. The caveat is ductwork: if your ducts are undersized or leaky, both systems will underperform their ratings, and the real-world gap between them shrinks. In mild climates where the system runs a few months a year, the 14.3 tier is the more rational buy because the payback stretches too long to matter. One more consideration: the 15.2 systems in this lineup ship with the more capable multi-position air handlers, which gives you more flexibility if your installation has unusual space constraints.
Can a mini split like the Daikin Entra replace my whole-home heat pump?
Only if your home is small, well-insulated, or you are willing to install multiple indoor units — a single 18,000 or 24,000 BTU mini split serves one open zone, not a whole ducted house. Where mini splits shine is zoning: you heat or cool only the rooms you occupy, which is why their 18 SEER2 rating translates into very low bills for the space they cover. For a whole-home conversion, a multi-zone ductless setup works but starts competing on price with a conventional split system once you pass three indoor heads. The strongest cases for the Entra are additions, converted garages, sunrooms, and homes where running ductwork is impractical. If you have working ducts and need whole-house coverage, a Goodman split system is the more straightforward and usually cheaper path.
Conclusion
The right pick depends entirely on your starting point. For best overall, the Goodman 3-Ton 15.2 SEER2 Multi-Position R-32 System with Air Handler earns the top spot with the best efficiency-to-capacity balance in the lineup and flexible installation options. For best value, the Ace Air 3 Ton GPHH3 packaged unit with its bundled 10kW heat kit delivers whole-home heating and cooling with the fewest add-on purchases, while the Goodman 2.5 Ton 13.4 SEER2 packaged unit is the smartest choice for straightforward like-for-like replacements. For best premium performance, the Daikin Entra mini splits lead on efficiency and quiet operation for room-level comfort. For beginners and small homes, the Goodman 2-Ton split system with the included thermostat removes guesswork with a matched, complete package. And for buyers in cold climates needing serious backup heat, the packaged units with 10kW kits — especially the 3.5-ton Ace Air — are the safest bets. Match the format to your home first, size it properly second, and the model choice almost makes itself.










